Find Valtek 3ohm Injector Type 30/33/37/40 Coil, Tomasetto Rail Injecotrs Accessories Solenoid Coil, Omb Cng Lg1 Rail Injector Coil on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Common Rail Injector > 3 Ohms Solenoid Coil For OMB Injector Rail

3 Ohms Solenoid Coil For OMB Injector Rail

  • 3 Ohms Solenoid Coil For OMB Injector Rail
  • 3 Ohms Solenoid Coil For OMB Injector Rail
  • 3 Ohms Solenoid Coil For OMB Injector Rail
  • 3 Ohms Solenoid Coil For OMB Injector Rail

3 Ohms Solenoid Coil For OMB Injector Rail

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: About 7 Days
    Packaging: Plastic bag, Box, Carton, Pallet
    Productivity: 300000 pcs per month
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: Ningbo China
    Supply Ability: 70000 pcs per week
    Certificate: CE
    Port: Ningbo,Guangzhou,Shanghai

Basic Info

Model No.: BB09325013

Product Description

OMB lg1 Injector Rail Solenoid Coil 3 Ohms


The 3 Ohms Solenoid Coil For OMB / Valtek / Tomasetto Injector Rail is made of thermoplastic composite material or flame retardant heat-resistant resin. Excellent resistance to high temperature and moisture. Widely used in car dual fuel CNG refit system, gas Common Rail, motorcycle device. Commonly used voltage resistance DC12V / 3 Ω / 6 Ω / 8 Ω.


Working principle of spraying rail:

1. The gas is stored in the guide rail and sprayed through the nozzle to the engine inlet pipe.

2. Computer controlled nozzle injection. 3 or 4 nozzles are installed on the guide rail to suit different models.

3. The temperature and pressure of the gas entering the guide rail can be monitored. The maximum operating pressure is 300Kpa.

4. When the electromagnetic coil of the spray rail is energized, the suction will be generated, the needle valve will be sucked up, and the nozzle hole will be opened. The gas will be ejected at a high speed through the annular gap between the shaft needle and the nozzle at the head of the needle valve, forming a fog, which is conducive to full combustion.


Technical data of 3 Ohms Solenoid Coil For OMB Injector Rail:

Model number BB09325013
Reference number 3ohm injector type 30 / 33 / 37 / 40, 3ohms IR3045 / IR3020 / IR3087
Normal voltage DC12V (±10%, other can be customized)
Normal resistance 3 ohms
Normal power DC:48Watt
Material Plastic, Brass
Wire class H
Connection DEUTCH
Application OMB / Valtek / Tomasetto Type CNG Injector Rail and On / Off shut-off Solenoid Valve
Hole diameter 9 mm
Height 29.2 mm
Width 25 mm

Overall dimension of Valtek 3ohm Injector Type 30 / 33 / 37 / 40 Coils:

Overall dimension of Valtek 3ohm Injector Type 30 / 33 / 37 / 40 Coils

Detail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid Coil:

Detail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid CoilDetail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid Coil


Applied in CNG Injector Rail and On / Off shut-off Solenoid Valve:



Production display of Omb Cng lg1 Rail Injector Coil:




Question 1: Is there an electromagnetic coil for the automotive industry?
Answer: Yes, we do the solenoid valve coils of the automotive industry, including car engines, car gearboxes, car exhaust, car suspension systems and automotive ABS anti-lock systems.


Question 2: How to choose a suitable solenoid valve coil?
Answer: Users can provide us with a series of solenoid valve coil data, such as solenoid valve coil pressure, solenoid valve body material, interface size and media, etc. We will recommend suitable products for customers.


Note on the use of solenoid valve coil:
1. When the coil is energized, it is strictly forbidden to cover to prevent overheating and burning;


2. Electromagnetic coils, sockets, electromagnets and connecting parts are strictly prohibited from hitting the collision to avoid damage;


3. When the coil is energized for normal operation, due to its own heat, the temperature is high, please do not touch it;


4. The working pressure, temperature and viscosity of the medium shall not exceed the specified range;


5. The actual power supply voltage must not exceed the specified range;


6. Ordinary solenoid valve coils should not be used in explosive places;


7. The internal parts of the solenoid valve and the filtering device must be cleaned regularly;


8. Check the model and parameters on the valve label, which must meet the technical requirements of the site;


9. Check the coil, electromagnet and electrical socket to ensure no external damage;


10. When the solenoid valve coil is not used for a while, it can be stored in the room where 0 °C - 40 °C, relative humidity <80%, and no corrosive gas, no open storage is allowed;


11. When the electromagnetic valve is installed in the open air, a protective cover must be installed to ensure performance and extend the service life;


12. The AC solenoid valve coil must not be energized at no load, otherwise there is a danger of burning;


13. The best installation method of the solenoid valve is perpendicular to the horizontal pipe, the coil is upward, and the maximum inclination angle is <30° during installation. Otherwise, normal use cannot be guaranteed;


14. Clean and purify the pipeline. The working medium of the solenoid valve should be clean. If the medium contains particulate impurities, a filter device must be installed on the pipeline before the valve.


15. Connect the valve's interface to the pipe according to the direction indicated by the arrow on the valve body, and ensure that the joint is well sealed.


Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 

BRANDO is a professional manufacturer and designer of Solenoid Valve, Solenoid Valve Coil and Solenoid Valve Armature Assembly, located in Ningbo, China. And we can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.


BRANDO maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.


BRANDO has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.


banner 2


Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.



Product range:

1. Solenoid Coil
2. Solenoid Coil Connector
3. Solenoid Valve Armature Assembly
4. Solenoid Valve Timer
5. Brass Solenoid Valve
6. Stainless Steel Solenoid Valve
7. Plastic Solenoid Valve
8. Pneumatic Cylinder
9. Pneumatic Valve
10. Pneumatic Hose Fitting
11. Refrigeration Solenoid Valve
12. Pulse Jet Valve
13. Diaphragm Repair Kit
14. Pulse Controller
15. Air Compressor Auto Drain Valve
16. LPG CNG Injector Rail


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!

Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Hose Fittings , Pulse Jet Valves , Refrigeration Solenoid Valves
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters